News

New EDM Wire Is Tough To Break |  Wire EDM filter supplier In many aspects of life, the characteristics of strength and toughness are thought to be synonymous, and indeed that is often the case. However in the world of wire EDM, considering strength and toughness to be synonymous can result in a fair measure of disappointment when one is struggling with wire breaks caused by less than ideal flushing conditions. Howev

Abstract In this paper, a closed-loop wire tension control system for a wire-EDM machine is presented to improve the machining accuracy. Dynamic models of the wire feed control apparatus and wire tension control apparatus are derived to analyze and design the control system. PI controller and one-step-ahead adaptive controller are employed to investigate the dynamic performance of the closed-loop wire tension control

Development of a prototype Micro-Wire-EDM machine, TAGUTI edm filter products With the demands on the minimization of surface roughness, decrease of the producible geometric dimensions and improvement of the machining accuracy, Micro-Wire-EDM with a wire diameter of 80 μm and below has been a key technology for micro-machining. The purpose of this paper is to develop three key techniques for a prototype CNC micro-wir

Development of a prototype Micro-Wire-EDM machine, EDM Filter manufacturers Abstract With the demands on the minimization of surface roughness, decrease of the producible geometric dimensions and improvement of the machining accuracy, Micro-Wire-EDM with a wire diameter of 80 μm and below has been a key technology for micro-machining. The purpose of this paper is to develop three key techniques for a prototype CNC mi

Rupture failure and mechanical strength of the electrode wire used in wire EDM, wire EDM Filters Abstract In the application of wire EDM, wire rupture is very troublesome and impedes further increase of cutting speed. Instead of the spark characteristics or the temperature distribution, the rupture mechanism and the mechanical strength of the wire are the focus of this investigation. Wire rupture is a mechanical fail

Wire EDM for Micromachining Applications，Charmilles wire edm filters The new CUT 1000 OilTech wire EDM was designed for micromachining and other precision applications. The machine uses wires as small as 0.02 mm diameter and SF technology to achieve surface finishes down to 0.05 microns Ra in continuous operation. By using oil as the dielectric, the CUT 1000 OilTech eliminates the effects of workpiece corrosion due t

All TAGUTI Wire EDM Filters series, these wire EDM Filters are fit for HITACHI SERIES JAPAX SERIES MAKINO SERIES WASHINO SERIES AMADA SERIES TAIWAN MACHINE SERIES SODICK SERIES FANUC SERIES MITSUBISHI SERIES AGIE/CHARMILLES SERIES SEIBU SERIES BROTHER SERIES for details please view our Wire EDM Filters catalog on homepage.navigation

Wire EDM Units Cut Inconel, Titanium and More | wire edm filter wholesalers The FANUC RoboCut iE Wire EDM series features a new power supply for accurate and efficient cutting performance in challenging materials, the company says. Other features include a redesigned lower arm and controls for improvements in efficiency, cutting speeds and energy savings. According to the company, the recast layer is virtually undete

What Is Electrolysis? | TAGUTI edm wire cut parts For the practical application of EDM, electrolysis is the production of chemical changes by the passage of an electrical current through an electrolyte, that is, a nonmetallic electrical conductor through which current is carried by the movement of agitated ions. In wire EDMing, stray energy in the dielectric fluid, produced by the cutting process itself, interacts wi